Technical Data Sheet
Con-Corr Hi T
High Temperature Acid Corrosion Inhibitor
Product Overview
Con-Corr Hi T is a high temperature, environmentally responsible acid corrosion inhibitor.Con-Corr Hi T contains no quaternary amines or propargyl alcohol. This high temperature corrosion inhibitor was designed for 300°F (150°C). An intensifier, such as formic acid, is needed to reach temperatures above 250°F (120°C).
Recommended Application
- Rigorous mixing of Con-Corr Hi T is recommended if used at full strength for maximum inhibitor dispersion and protection.
- Refer to Laboratory Performance Test Data for specific inhibitor concentrations (gpt).
Features & Benefits
- Environmentally acceptable.
- Excellent HCl acid corrosion protection.
- Attractive treating cost.
- Performance @ 300°F (150°C) < 0.06 lb/ft2/day (2% inhibitor and 2% intensifier).
- Performance @ 300°F (150°C) < 0.04 lb/ft2/day (2% inhibitor and 3% intensifier).
Safety & Environmental
- Refer to MSDS for latest and most up-to-date safety, environmental information.
- Observe normal handling and safety precautions for industrial chemicals.
Minimum Order Quantity
- 40,000 pound minimum order.
Note: CCUSA is a wholesale industrial and commercial bulk chemical supplier.
Shipping, Handling & Storage
- Refer to MSDS for latest and most up-to-date shipping, handling, and storage information.
- Con-Corr Hi T has a shelf life of up to 1 year when stored properly.
Typical Properties
| Property | Value |
|---|---|
| Specific Gravity @ 68°F (20°C) | 0.9175 – 0.9475 |
| Density, lbs/gal @ 68°F (20°C) | 7.7821 |
| Flash Point, (TCC) | 68°F (20°C) |
| Pour Point | -20°F (-28.9°C) |
| Viscosity, cPs @ 68°F (20°C) | 5 - 50 |
| pH,10% in 3:1 IPA/DI H20 | 2.6 - 4.6 |
| * For most current data, please refer to MSD Sheet. | |
Laboratory Performance Test Data
Test Conditions:
- Coupon Type: N-80 Steel
- Test Time: 4 hours
- Intensifier: Formic Acid, KI
| HCl by Vol. % |
Inhibitor Vol. % |
Intensifier, Formic Acid Vol.% |
Test Temp °F |
Results lb/ft2 |
|---|---|---|---|---|
| 15 | 2.0 | 2.0 | 300 | 0.0560 |
| 15 | 2.0 | 3.0 | 300 | 0.0330 |
| 15 | 2.0 | 4.0 | 300 | 0.0210 |
| 15 | 2.0 | 5.0 | 300 | 0.0270 |
| 15 | 2.0 | 2.0 | 320 | 0.1420 |
| 15 | 2.0 | 3.0 | 320 | 0.1160 |
| 15 | 2.0 | 4.0 | 320 | 0.0390 |
| 15 | 2.0 | 5.0 | 320 | 0.0631 |
| 15 | 2.0 | 5.0 | 340 | 0.2012 |
| HCl by Vol. % |
Inhibitor Comp by Vol. % |
Intensifier, Kl Vol.% |
Test Temp °F |
Results lb/ft2 |
|---|---|---|---|---|
| 15 | 2.0 | 1.0 | 300 | 0.0813 |
| 15 | 2.0 | 1.0 | 320 | 0.1070 |
